Selected Peer-reviewed Publications
Pandey P., Song Y., Turton R., Modeling of pan coating
process of pharmaceutical dosage forms, Handbook on Granulation, book
chapter submitted to Elsevier, 2006
KuShaari K., Pandey
P., Y. Song, Turton R., Monte Carlo simulation to determine coating uniformity in a
Wurster fluidized bed coating process, Powder Technology, under review
2006
Pandey P., Katakdaunde M., Turton R., Monte Carlo simulations to
determine coating uniformity in a pan coating process, AAPS PharmSciTech,
in prep. 2006
Pandey P., Song Y., Kayihan F., Turton R.,
Simulation of particle movement in a pan coating device using discrete
element modeling and its comparison with video-imaging experiments,
Powder Technology,
161(2), 79-88, 2006
Song Y., Turton R., Kayihan F., Contact detection
algorithms for DEM simulations of tablet-shaped particles, Powder
Technology, 161 (2006), 32-40
Huang Y., Turton R.,
Park J., Famouri P., Boyle E. J.,
Dynamic Model of
the Riser in Circulating Fluidized Bed,
Powder Technology,
in press 2006
Pandey
P., Turton R., Movement of different shaped particles inside a pan
coating device using novel video-imaging techniques,
AAPS PharmSciTech,
6(2), 237-244, 2005
Pandey P., Turton R., Yue P., Shadle
L., Evaluation of a backscatter imaging LDV system and its application to a
pilot-scale circulating fluidized bed,
Particulate Science and Technology,
24(1), 1-22, 2006
Crites T., Turton
R., A Mathematical Model for the Prediction of Cycle-Time
Distributions for the Wurster Column Coating Process,
Industrial and Engineering Chemistry Research, in press, 2005
Turton R., Cheng X. X., The scale-up of coating processes
for granular solids and tablets,
Powder Technology, 150, 78-85, 2005
Park J., Huang Y., Turton R., Famouri P., Boyle E.J., The control of
bed height and solids circulation rate in the standpipe of a cold flow
circulating fluidized bed,
Powder Technology, 150(3), 176-184, 2005
Sandadi S., Pandey P., Turton R., In-situ, near real-time acquisition of
particle motion in a rotating pan coating equipment using imaging
techniques,
Chemical Engineering Science, 59(24), 5807-5817, 2004
Pandey P., Turton R., Yue P., Shadle L., Non-intrusive particle motion
studies in the near-wall region of a pilot-scale circulating fluidized
bed, Industrial and Engineering Chemistry Research, 43(18), 5582-5592,
2004
Sudsakorn K., Turton R., Non-Uniformity of Coating on a Size
Distribution of Particles in a Fluidized Bed Coater,
Powder Technology, 110(1-2),
37-43, 2000
Cheng X. X., Turton R., The Prediction of Variability Occurring in
Fluidized Bed Coating Equipment Part 1: The Measurement of Particle
Circulation Rates in a Bottom Spray Fluidized Bed Coater,
Pharmaceutical Development and Technology, 5(3), 311-322,
2000
Cheng X. X., Turton R., The Prediction of Variability Occurring in
Fluidized Bed Coating Equipment Part 2: The role of non-uniform Particle
Coverage as Particles Pass through the Spray Zone,
Pharmaceutical Development and Technology, 5(3), 323-332,
2000
Walia P., Stout P. J., Turton R., Preliminary Evaluation of an Aqueous
Wax Emulsion for Controlled Release Coating,
Pharmaceutical Development
and Technology, 3(1), 103-113, 1998.
Sharma K. R., Turton R., Mesoscopic Approach to Correlate Surface Heat
Transfer Coefficients with Pressure Fluctuations in Dense Gas-Solid
Fluidized Beds,
Powder Technology, 99, 109-118, 1998.
Saadevandi B.A. Turton R., The Application of Computer-Based Imaging
to the Measurements of Particle and Voidage Profiles in a Fluidized Bed,
Powder Technology, 98, 183-189, 1998.
Walia P., Stout P. J., Turton R., Preliminary Evaluation of an
Aqueous Wax Emulsion for Controlled Release Coating,
Pharmaceutical Development
and Technology, 3(1), 103-113, 1998.
Xu M., Turton R., A New Data Processing Technique for Noisy
Signals,
Powder Technology, 92, 111-117, 1997.
Benavides F., Clark N. N., Turton R., The Design of Dense Fluidized
Beds Subject to Uneven Slumping,
Powder Technology, 92, 275-279, 1997.
